Deciding on Installing Your Home Standby Generator Yourself

Install a Home Standby Generator Yourself: Why/ Why Not?

Standby generators come together with the automatic transfer switch to supply electrical energy throughout a power outage. Installation just isn’t necessarily a complex job, nonetheless it does require knowledge past the scope of many do-it-yourself books. Handling the project yourself rather than employing an experienced and qualified installer can stretch your budget, nonetheless it probably will take more time. You will find pros and cons to handling it as being a do it yourself project and employing an expert.


Most effective standby generator installation uses a load center combined with an automatic transfer switch within a unit. The transfer switch connects to some double-pole breaker in the primary service panel. The circuits the generator will power are disconnected in the primary panel and routed into the new automatic transfer switch where these are associated with new breakers.
Other installations switch the main service panel with a brand new one that incorporates the automated transfer switch, or even the ATS is installed between the meter and also the existing panel.
Plumbing to increase the home’s gas lines for the standby generator is essential with an assessment in the gas utility meter to make certain it’ll handle the elevated flow of gas. Or else, the utility requires a brand new meter installation.

Electrical Work

Should you be knowledgeable enough to accomplish the project yourself which will also enable it to convince the local building inspector that you can handle the job, you may be around the installation. Understanding of the country’s Electric Code in regards to the installation as well as your service entrance, along with a extensively recorded policy for installation can help create a permit to proceed which has a generator installation, but you will still need to fit everything in correctly and pass the inspection.
Failure to incorporate important codes or making dangerous mistakes might prompt the inspector to require you to hire a mason after the fact, which will probably amount to more cash in the long run. Using a “No Occupancy” tag slapped on your home simply because you made lots of mistakes can send you off to a motel and incur more expense until the problems are corrected and your generator passes installation.

Plumbing Work

Linking to your home’s propane or LP gas supply lines is necessary. Natural gas lines for the new standby generator are run with black iron pipe, and LP gas uses copper or plastic tubing. You will require the skill to generate leak-free connections and then test for leaks following the installation.
Building inspectors shy of house owners that might like to do their very own gas line plumbing work, and gas utilities feel exactly the same. The danger of explosion or suffocation from leaking gas is great when errors happen and gas lines leak. Explosion danger reaches neighboring homes.


When to Do-It-Yourself

Should you be positive about your talent and may have the building permit, then go on and install your standby generator and automatic transfer switch. Follow every one of the manufacturer instructions in addition to all local building codes. The structure inspector must be other people you know through the installation and may offer advice and caveats. Should you come across conditions lead you to deviate from your plan, call the inspector to be sure the newest plan is acceptable. Most of all, never proceed with purchasing materials or starting the installation before you have the proper permits.

When to Employ a Pro

Understand that you’re working with electricity and will also be exposed to dangerous electrical currents. You will need to make use of your home’s gas lines and make a leak-free pipe run and connection to the standby generator. Failure either in of the trades might cause severe injury or death. If you’re not positive about your abilities with proven experience, hire an authority. It’s worth the peace of mind and saving a few bucks isn’t worth losing the life of someone you care about or yourself.

For more information go to:

Home Power Generation Units and Their Impact

Home Power Generation Units along with their impact

It was less than a century ago that electrical energy would be a convenience rather than a necessity. Homes which had electricity enjoyed a couple of lights and in many cases fewer receptacles for plugging appliances into. Electrical codes were few and those that existed weren’t widely enforced. Gradually, the benefits of electrical energy were realized through the 1930s, most homes in US cities had electricity, but rural farms and houses didn’t.
The Rural Electrification Act of 1935 was passed with the aim of providing electrical energy to all homes in the United States. Multiple electricians worked in conjunction with line crews to set up electrical energy on farms. Most homes were provided 60 amp service that included a range circuit, a kitchen circuit, and 2-3 lighting circuits.

Reliance upon Electricity

And in addition, luxury hotels and manufacturing facilities were the first one to embrace electricity. Hotels installed electric lighting and operated their particular generators. Likewise, industry switched from steam driven equipment to electrical motors and also used electrical generators to deliver their particular electrical energy.
As the capacity to produce electricity grew, hotels and industry gradually stopped generating their very own power and used the newly constructed power grid instead. Electrical power use spread to other businesses and then homes in cities and across America’s rural areas.
As electrical service was installed across the county, reliance on electricity grew. Refrigeration that has been once based on blocks of ice was largely substituted with electric refrigerators after the 1940s. Electrical lighting proved safer than oil lanterns and gas lamps, and America’s reliance on electricity grew as each new convenience was a necessity. Virtually all the electrical energy came from generators run by the 1st electric utilities.

Backup Power

The electrical energy grid has long been prone to interruptions due to natural events and accidents. Weather is truly the culprit behind an outage so when problems for the grid is widespread, it may take days or weeks to repair.
Home standby and portable power generation units provide electrical energy in the event the utility service is interrupted. They are doing more than just supply power with regard to convenience, they protect homes, families, and property. Today’s modern home relies upon electricity for a number of purposes, and any kind of those can spell disaster in the event the utility electrical power is interrupted. Your house power generation unit supplies electrical energy that is not simply a convenience, but has changed into a necessity.

Medical Equipment – Here

People who rely upon medical equipment have the ability to live at home and not in institutions due to the widespread availability of reliable electricity. If the supply of electrical energy is interrupted, the medical equipment fails. Home generators for backup power can provide the necessary electrical energy and keep the equipment operating. Generators provide power in short periods until help arrives, or so long as the outage lasts. Home medical equipment which will be powered by standby generator or generator power includes oxygen generators, monitors, CPAP machines, and residential dialysis equipment, along with other types of equipment.

Home Appliances

Within a power outage, home generators supply power for sump pumps to stop flooding, well pumps to provide water for drinking and sanitation, and refrigerators and freezers to help keep food from spoiling.
Early twentieth century homes had outdoor plumbing, passive heating systems, and windows for temperature control. Today, HVAC systems provide heating and cooling to help keep homes warm or cool and still provide adequate ventilation and the plumbing from freezing or mold from growing in the event the humidity is way too high.
As reliance on electricity has exploded, our capacity to do without it has decreased proportionally. Home power generation units fill in the space left when utility companies are not able to deliver electrical energy to homes that need it.

To find out more, go to:

Uses and Best Fit for Under 14kW Generators

Uses and finest Fit for less than 14kW Generators

Generators that produce under 14kW of power may seem like lightweights, but a majority of them provides power within an outage to help keep critical circuits operating and still provide several conveniences at the same time. Standby generators combined with an automated transfer switch operate automatically during an outage to keep your home supplied with power, even if you’re not home. Portable generators won’t operate automatically, however they can perform the job when a standby generator is just not an alternative.

Fuel Consumption

Supplying fuel for a generator during an outage is usually a concern. Finding gasoline or diesel fuel after a widespread outage might be difficult or supplies could be restricted. After Hurricane Sandy, some areas rationed gasoline. Smaller generators use less fuel, and consumption is directly afflicted with electrical load.

Standby generators use propane or propane and eliminate the necessity for continuous refueling. Some portables can operate on propane, and some will use propane, propane, or gasoline.

Homes designed to use LP gas as an alternative to propane must store their fuel inside a tank. LP-powered generators from 7kW to 14kW in many cases are ideal for LP gas installations given that they use less fuel than larger generators. Expect a completely loaded 7kW generator to use about 1.3 gallons of propane an hour, while 20kW can use approximately 2 gallons by the hour to generate the equivalent amount of power.

Homes with Lower Power Requirements

Don’t assume all home requires how much power a large generator is capable of producing. Many older homes have 100-amp or perhaps 60-amp main service panels, and all the power they are able to me is already limited. Even newer homes with 200-amp electrical service don’t utilize much power.

A 13kW generator can produce 54 amps of current continuously at 240 volts―almost over a 60-amp service, and with the exception of peak periods, it nears all the power supplied via a 100-amp service in several situations. A larger generator is just unnecessary.

When ac units as well as other high-voltage, high-current appliances are utilized, a transfer switch that manages generator power will assure that power hungry appliances obtain the power they need.

Mobile Homes

Many mobile homes are created and produced for 50-60-amp service and therefore are supplied using an external disconnect mounted on a pole or post outside the mobile home, with the utility company meter. Building codes typically have to have a 100-amp service as the minimum, and also the cabling that runs between your disconnect and also the ‘recreational vehicle’ must accommodate very much power. Other jurisdictions allow connection via a 60-amp cord and receptacle.

Either way, the electricity needs of mobile homes are normally below built-in-place homes, and therefore are good candidates for less than 14kW portable or standby generators that work on LP gas, propane, or gasoline. Gasoline storage is often a condition in ‘recreational vehicle’ communities, making LP or propane preferable.

Sustainable Energy Systems

Solar and wind power powered off-the-grid energy systems provide their particular power which gets kept in batteries. They provide enough power for cost effective appliances and rely on power through the electric utility. In most cases, they are fully disconnected from your power grid.

Generators made to operate off grid and are powered by LP gas fill out the gap once the sun doesn’t shine or the wind doesn’t blow, and battery levels run low. Typically, these generators produce about 6kW, although larger units can be found. Off grid and alternative energy systems focus on minimal power use and ecologically friendly operation, making small, power efficient generators the ideal choice.

To find out more go to:

Need More than a 20kw Generator can Provide

Need More than a 20kw Generator can offer? A Look at Larger Units and Who Needs Them

Air-cooled standby generators top out at 20 kilowatts, a little more than 83 amperes at 240 volts. Most new homes have 200-amp service. Normally, most homes don’t use the quantity of power their service is capable of supplying, and seldom come close―most of the time. Actually, most homes don’t exceed 80 amperes apart from short periods or when large motors on air conditioners or well pumps start. In the 1940s towards the 1970s, 60-ampere service was usual and 100-ampere service became common within the 1970s.

With power management features available for most residential standby generators, in addition to conservative power use practices, most homes can perform comfortably on 20 kilowatts or a reduced amount of standby power.

Higher Power Requirements

Larger homes have higher power requirements. It isn’t uncommon to wish 300- and 400-amp service in large homes, along with the largest luxury homes are often supplied with even larger electrical service. They have multiple, high-capacity air conditioners and furnaces, and in general, larger appliances.  Power use exceeding 20 kilowatts may be the normal, everyday a higher level use within these homes.

Smaller businesses and manufacturing facilities will also be higher users of electrical energy. In the case of larger facilities, multiple standby generators can be used to produce enough standby electrical energy in order to supply emergency systems which don’t include everyday operational requirements.

Liquid Cooled Generators

Liquid-cooled standby generators use engines similar to those within cars. There is a fan-cooled radiator stuffed with coolant that is pumped from the engine to chill it. They do not depend upon the ambient air temperature to directly cool the engine, and since their air conditioning is active rather than passive, they have got less downside to overheating and provide more reliable operation.

Standby generators of this type can be obtained with as many as 60 kilowatts of power for residential use, and greater models all the way to 150 kilowatts for commercial use. A capacity of 60kW can supply as much as 250 amperes of current continuously, enough to keep most luxury homes operating without resorting to judicious usage of power.

The bigger, commercial standby models will handle the requirements of most commercial facilities and can supply electricity restaurants, office buildings, apartments and condos, and retail facilities. Facilities which need more power can install multiple units.


For residential use, Generac Power Systems manufacturers the QuietSource line of home standby power generators. The QuietSource models can be bought in 22, 27, 36 and 48 kilowatts, enough power for most larger and luxury homes. QuietSource generators include models in 240-volt single-phase,  208-volt three-phase, and 480-volt three-phase standby power.

Generac’s Commercial compilation of liquid-cooled standby generators include 22 to 150 kilowatt models for business or commercial use and are avalable in 240, 208, or 480 volt models in both single and three-phase configurations. Models with aluminum or steel enclosures can be obtained.

Briggs & Stratton has three models available for whole house standby power in 35, 45, and 60 kilowatts to power the most important of luxury homes throughout a power outage. With this sort of power available, you don’t need to forgo any of life’s necessities or conveniences.


Homes that depend upon high-demand electric appliances such as ranges, dryers, hot water heaters, well pumps, electric heating, and central air conditioners may need more power than an air-cooled standby generator can supply without extensive management and careful using of power. These homeowners must look into a greater, liquid cooled generator.

Businesses and commercial operations ought to have the reliability and better power advantages that larger, liquid-cooled standby generators can offer.

For more information on these great brands, please go to:

Emergency Generators – A Must for All Residential Homeowners

Emergency Generators: A Necessity for All Residential Homeowners

The time when electricity in the home was a luxury convenience is long past. Since the end of the 1940s, virtually any existing home in the United States has been given electric power, and quite a few jurisdictions require complete installation in new homes. Modern homes depend on electricity for heating and cooling, preventing ground water flooding, alarm systems and refrigeration. Homes in rural areas also have electricity to collect water for consumption, hygiene, and sanitation.

When electric power goes off, these essential systems will no longer function. Basements and crawl spaces can flood from ground-water seepage, refrigerators and freezers slowly warm and food spoils. In subfreezing temperatures, the plumbing may ultimately freeze producing broken pipes and the opportunity for flooding. During extended outages, batteries in alarm systems will fail. People who depend on medical equipment may be at increased risk if they do without their life support systems.

Making do without electricity is frequently not only a fiasco, it places the property at an increased risk and can threaten the lives of people who depend on the safety their house provides.

Emergency Generator Protection

It can be unnecessary to reside without electric power after an urgent situation generator is installed.

When utility power fails, an urgent situation way to obtain power will keep essential circuits operating. The larger the generator, the more it is able to power. Smaller standby and portable units of 5000 to 7000 kilowatts can keep the refrigerator and freezer cold, power a few lights, with the sump pump as well as perhaps the furnace whether it is needed.

Larger units approximately 14 kilowatts with power management strategies will handle more appliances including well pumps, hot water heaters, and air conditioners, along with more convenience lighting and small appliances or computers.

Air cooled standby units all the way up to 20,000 watts are available for larger homes or more appliances. Liquid cooled units of up 60 kilowatts will supply even the most power hungry of homes with sufficient capability to keep everything running from pool pumps to hot tubs.

Standby Emergency Generators

Portable generators can provide backup power, nonetheless they won’t take action automatically. With regards to emergency power for critical home systems, the standby generator fills in if the utility is not able to deliver power.

Standby emergency generators are permanently installed appliances that work with an automatic transfer switch. The switch selects utility power during normal operation and standby generator power during an outage. It reconnects the utility when service is restored. Both air-cooled and liquid-cooled models are available for residential homes, and run using natural gas or on LP gas (propane). These are reliable and initiate automatically during a power outage without operator intervention to protect the property and family regardless if the homeowner is away away or at the office a fairly short distance away.

Portable Generators For Emergencies

Portable generators also supply power during emergencies, but have to have the homeowner to hook them up, start them, and manually switch the property to generator power employing a manual transfer switch. They also require a steady diet of fuel. A standard installation includes the manually operated transfer switch that connects to an inlet box and also to the principle service panel. The switch supplies power in the main panel or in the generator with a select number of essential circuits. A heavy-duty cord connects the generator towards the inlet box.

A less sophisticated method connects appliances towards the generator with electrical cords. This works for many owners, but operating hard-wired appliances including the furnace is often difficult.

Emergency generators supply all-important power during emergencies and each home should be furnished with an urgent situation power source.

To find out more info, head to:

Why Kohler Generators are a Great Option for Home Standby Units

Why Kohler Generators are a Great Alternative for Home Standby Units

Kohler entered the power generator industry after The First World War when they began building the Kohler Automatic Power & Light Power Plant in 1920 to use on farms as well as in other isolated locations. At that time, the rural power grid hadn’t been conceived and the power plant filled a niche that filled a quick-growing dependence on electricity. The generator system was revolutionary for the reason that it started automatically whenever power was needed as an alternative to operating regularly.

During The Second World War, Kohler supplied generators to U.S. troops around the world for the war effort. After the war, they built standby emergency power generators for hospitals, businesses and government buildings that needed a trusted way to obtain standby power―at the period an unusual concept―Kohler had been there with generator products that met the requirements of the time.

After their entry into the generator market more than 90 in years past, Kohler Power Systems is still manufacturing and supplying standby power generators that really work automatically without human intervention.

Kohler Home Standby Generators

Kohler’s home standby generators supply power once the electric utility fails. Joined with a computerized transfer switch, the units standby around the clock to start and run automatically in the event of your power outage.

Once the power fails, the generator waits a couple of seconds to ensure the outage is just not momentary. Then your engine starts and reaches operating speed. The automated transfer switch disconnects from the utility supply and connects towards the generator. Electricity is restored to selected circuits through the entire home (with respect to the transfer switch configuration). Once the utility line is re-energized, the transfer switch restores utility power to the house. The generator runs to get a minute for cooling down, then shuts down.

Kohler supplies home standby generators in sizes that cover anything from 8500 watts to 100kW that match the power needs of even the most luxurious homes and a lot of businesses.

Automatic Transfer Switches

Standby generators require an automatic transfer switch to work automatically. Kohler designs their automatic transfer switches specifically to work with their standby generators. They have a number of different designs to meet the requirements of most homes.

The Intelligent Transfer Switch Load Center combines a principal service panel by having an automatic transfer switch that includes a smart load-shedding power management system. The indoor model has room for 40 circuit breakers, the outdoor NEMA 3R model has room for 28. This model can switch the main service panel.

Other transfer switches made by Kohler include 100 to 400 amp models without or with load centers and power management capabilities. Models without load centers can manage utility and generator power for the whole home or maybe a subpanel, while load center models are created to operate being a subpanel with all the main circuit breaker panel as the source.

Kohler Power Systems Reliability

Kohler includes a long reputation for reliable power solutions. Their innovative systems happen to be providing power at home and around the world since the 1920s, and they also were one of the primary to supply automatic standby power generators. Their house standby generators include an industry-leading warranty that covers their units for five years or 2000 hours. The generators can operate for days or perhaps weeks as appropriate, and so their models are factory tuned to operate on either LP gas or Gas, driving them to efficient and reliable performers that supply utility quality power when needed.

For more information, please go to:

Understanding the term Home Standby Generators

Understanding the term Home Standby Generators

Residential use generators supply power to homes once the electric utility supply is lost. Utility power interruptions occur due to weather related events such as high winds, ice buildup on wires, wild animal damage, motor vehicle collisions, and damage caused by all kinds of other acts of nature or man. Devices and systems that rely on electrical power cannot function throughout an outage unless a supply of emergency power is accessible.

Permanent Installation

Standby generators will almost always be ready to operate, round the clock, 7 days weekly. They may be permanently wired on the home’s electrical system through an automatic transfer switch, and coupled to the home’s natural or LP gas supply pipes. The natural or LP gas hookup ensures the generator has always a sufficient availability of fuel available and won’t require frequent refueling throughout an extended outage.

Automatic Transfer Switch

Automatic Transfer Switches work alongside the standby generator’s controller. Following the generator starts and is able to accept the electrical load, the automated transfer switch disconnects the electrical system from your utility supply and connects it to the home standby generator. The change in power from one supply source to another is automatic and controlled by electronic switches inside the transfer switch. In the event the electric utility restores power, the transfer switch reconnects the utility supply and disconnects the generator.

Automatic transfer switches are often manufactured by the generator’s manufacturer to meet the requirements of the particular standby unit, simply because they work directly with all the standby generator’s controller. They also provide alternative ideas, such as power management, depending on the needs of the consumer.

Some transfer switches install between your utility meter along with the main service panel to provide power to your entire panel. Others install as a subpanel with the main service panel and just supply selected critical circuits, such as pumps, refrigerators, furnaces, and medical equipment.


Standby generators are automatic, permanently installed equipment which don’t require frequent refueling with liquid fuels. They operate without operator intervention, apart from regular, scheduled maintenance. Unlike portable models which should be connected and started when power is required, the standby home generator operates in a completely automatic mode, even if the homeowner is not present.

Standby power means the generator is able to operate all the time. When an outage occurs, the generator starts from a short delay, then your transfer switch moves your home onto emergency backup power. It occurs quickly and without intervention, but there are still a matter of seconds when the home is without electrical power. Some electronic equipment may require an uninterrupted supply that operates off battery power before standby generator will be able to start and connect to the home’s electrical system.


Installation requires building permits and the services of a certified electrician to install the transfer switch and make the required electrical connections, plus a plumber to connect the generator to the home’s gas supply. Inspections with the prepared gravel bed or layer of concrete usually are required before installation, along with the finished work after installation. Adherence to National Electrical Codes, Plumbing Codes, National Fire Protection Association Codes, and local ordinances is essential.

The place chosen for installation needs to ensure that exhaust gases won’t go into the home and the application of carbon monoxide detectors can also be required.

Home standby generators add when electric utility power becomes unavailable to guarantee the safety of homes, property, and families.

To find out more, go to:

Whole House Generators – a look at what really matters

Whole Home Generators – a review of what it really means, and the way much power you receive

Some standby generator packages are referred to as providing “entire house power” meaning they could power everything within your house. The packages almost always feature an automatic transfer switch with power management features.

Alone, “entire house power” implies that the complete house is supplied with power, however don’t assume all generators are equipped for producing enough power to support all appliances and lights concurrently.

Home Power Use

The conventional new house in the United States includes a 200-amp service panel with many circuit breakers. If your amperage of all breakers inside the panel are added up, they could total up to 800 amperes, far more over just what the panel or even the main breaker can handle. If all of the home’s appliances and lights were switched on, the complete would still not exceed 200 amperes as well as the main breaker wouldn’t normally trip.

Safety and convenience dictate the dimensions of the key service panel and the number of circuits it supplies. How big the key breaker isn’t really a good indicator of how much power the whole house uses.

Power Management

Managing power takes two forms. Homeowners do their part by turning off nonessential appliances and lights while operating on standby power. What produces a nonessential appliance depends upon the situation along with the convenience of the whole house generator. Power management devices including load-shedding controllers or digital power management systems prevent backup generator overloads by limiting the number of high-demand appliances that operate at the same time.

Automatic Transfer Switches

The automatic transfer switch is an essential part of the entire house generator system. Their installation configures them because gatekeeper for electricity for the complete home. During normal operation, they send power from the electric utility towards the main service panel. When utility power fails, they disconnect the utility lines from the home and route power from the entire house generator towards the main panel.

In order to meet electrical codes, the automatic transfer switch current rating in the entire house power configuration must equal or exceed the key circuit breaker current rating. A 200-amp main circuit breaker takes a 200-amp or greater automatic transfer switch. Employing a smaller switch for entire house power might cause a fire or permanently damage the switch.

Whole Home Generators

Generators are rated in watts (W) or kilowatts (kW), a measure of the work electricity can achieve. Air-cooled generators for entire house power begin with ratings of around 8,000 watts (8 kW) and top out at about 20,000 watts (20 kW). Liquid-cooled generators for residential applications offer 20 kilowatts to 65 kilowatts of electricity.

In contrast, a hundred amp main circuit breaker can handle about 24,000 watts of power plus a 200 amp panel about 48,000 watts of power. Understand that the property never uses how much power the key breaker is equipped for.

Choosing a Home Standby Generator

For the majority of applications, there’s no need or economical to install a whole house generator able to providing the equal power the key circuit breaker is equipped for. By using power management devices and judicious homeowner power use, smaller generators will offer the whole house with electricity.

Perform a power audit to determine the most power used at any given time. Figure out what high voltage appliances are essential and which aren’t. Finally, decide on a backup generator package that will satisfy the power needs from the entire house and use power management devices to manipulate the power supplied to high profile appliances for efficient entire house energy that meets your requirements.

For more info go to:

14kw Standby Generator Comparison

14kw Standby Generator Comparison

In the event the utility power goes out, standby generators supply backup emergency power during the entire power outage. Whether a major hurricane or even a fast-moving local thunderstorm, power outages lasts a few hours, every week, or provided that monthly or more. With a supply of standby power from a home generator, residents can remain within their homes as an alternative to seeking shelter elsewhere.

Home standby generators operate automatically and so are permanently coupled to the home’s electrical system with an automatic transfer switch which is usually offered by the generator’s manufacturer. The switch and generator controller interact. In the event the power goes out, the generator starts as the transfer switch connects the home to the generator and disconnects it from the utility company. After utility power is restored, the connections are reversed and the generator shuts.

Standard Features

Most 14kW standby generator manufacturers offer similar features and own make of extra functionality. The engines possess a fully pressurized lubrication system much like that in cars and may de-activate for low oil pressure or high engine temperature. Each of them run the generator by taking exercise cycles to keep the generator lubricated and prevent seals from becoming dry. After operating under load, they run for a short, no-load cool-down period.

Utility power is generally clean as well as totally free of excessive noise. The AC frequency is steady and unvarying, and the voltage stays inside a certain range, rarely falling below 108 volts and not exceeding 125 volts. Standby 14kW generators meet and frequently exceed the same requirements and supply utility-quality power, even though the loads change frequently or while starting large, heavy-duty motors.

Continuous Power

Standby generators are rated by the quantity of continuous power they’re able to supply, although not all provide you with the rated continuous turn on all fuels. Kohler Power Systems and Generac Power Systems are two manufactures of 14-kilowatt standby generators that are powered by LP or natural gas.

Some manufacturers derate their multi-fuel generators when operating on natural gas because natural gas contains about 10 % less energy than propane. An electric that will be powered by propane will most likely run okay on natural gas with some adjustments, but for the reason that gas has less energy, the engine cannot release the same power.

Remote Operation

Generac offers Mobile Link as one optional accessory. It uses the cellular txt messaging system to talk with an online-based dashboard that owners can access from anywhere with a net connection, bringing the Generac14kW standby generator controller to tcomputers around the globe. Status sms are forwarded to cellphone accounts. A digital cellphone connection with txt messaging is necessary at the 14kW generator installation site.

Kohler’s On Cue Remote Management Systems allows owners to control their 14kW standby generator from around the globe. Status messages can be delivered to dealers, owners, or both to ensure maintenance is completed as needed and problems dealt with before they create a generator to fail. Users can easily see real-time status, see and clean fault codes, manage generator performance, and review generator history. It offers for operation of multiple generators from one account. The On-Cue Safes requires Windows XP, Vista, Windows 7 or Windows 8 and generator web connection.


Kohler covers their 14kW standby generators with a consumer warranty of five years or 2000 hours for standby operation when reliable on-grid utility power can be obtained, and includes labor through the first couple of years after installation. For off-grid applications where utility power just isn’t reliable or available, the warranty covers parts for 1.5 years or 1000 hours.

Generac’s 14Kw standby generator includes a 5 year, 2000 hour limited consumer warranty for on-grid applications. Off-grid applications have no coverage and may void the warranty. Comprehensive parts, labor, and mileage are covered for the first couple of years, parts through the third year, and limited coverage in the engine block and alternator through the fourth and fifth years.

For more info go to:

Cummins Onan Cold Weather Package

Cummins Onan Cold Weather Package

Cummins Onan standby generators come in many different packages which include various automatic transfer switches and cold temperature packages. Standby generators from Cummins Onan operate automatically when the utility power supply is interrupted and they’re associated with an automatic transfer switch.

Cold temperature packages enable the generator engine to get started up easier during cold temperature, providing more reliable operation under harsh, winter months conditions.

Cummins Onan Standby Generators

Cummins is really a trusted name in power generation, and standby generators aren’t an exception. Home standby units for emergency power include the 20-kilowatt and 13-kilowatt air-cooled models, along with the 20 kilowatt liquid-cooled machines.

Cummins Power Generation combines their residential standby generators with some other automatic transfer switches to serve the needs of most home standby customers with utility-quality power that meets the demands of perhaps the most sensitive of electronics. The generators feature a 5-year, 2000 hour limited consumer warranty.

Cold Temperature Equipment

Cummins recommends incorporating cold-weather accessories to use in climates where temperatures drop to zero degrees or lower.

A breather heater warms the engine breather tube to prevent ice build up during cold temperatures. It plugs into a cold weather kit (available separately) or into any cold weather equipped generator. The breather heater is usually recommended to use in environments where temperatures drop below zero.

The car battery blanket warmer is a flexible heater that wraps round the battery it warm when temperatures drop below -10 degrees. An outside 120-volt outlet is necessary to connect the heater.

Cold temperature kits have an engine oil heater with an alternator dryer. The engine oil heater allows easier starting by keeping the oil warm and fluid, and enables the lubrication system to deliver oil faster after the engine starts. Alternator dryers keep frost from accumulating for the alternator.

20-Kilowatt Cold-Weather Packages

Four 20-kilowatt cold temperatures packages combine cold-weather equipped generators with automatic transfer switches. The 20kW standby generator packages can begin and operate a 5-ton ac and also have fully automatic power management capability.

The automatic transfer switches are either 100-amp or 200-amp, service-entrance-rated automatic transfer switches that include whole-house-power management capability and two-amp battery chargers, all in a NEMA 3R enclosure rated for outdoor installation. Included as well are an interior wireless monitor and internet monitoring with email notifications.

The RS20-C150 comes with the 100-amp ATS, while the RS20-C250 has got the 200 amp model. These generator packages are US EPA and CARB certified for emissions.

For quick and easy installation, Cummins Onan includes two, 100-foot installation harnesses with the RS20-C1100 and RS20-2100. The C1100 includes the 100-amp transfer switch the C2100 with the 200-amp ATS. US EPA emissions only. Not accessible in California.

13-Kilowatt Cold-Weather Packages

The 13-kilowatt standby generator packages from Cummins Onan include five different models. All include indoor wireless monitors and remote internet monitoring with email updates and they are 49 state compliant for US EPA emission standards.

Model 13GSBA-6711A is really a standby generator only equipped for cold weather operation.

Packages that include the automatic transfer switches are the RS13-150, RS13-250, RS13-C1100, and RS13-C2100. The transfer switches are service entrance, NEMA 3R rated for outdoor installation and designed with the two-amp 12v charger and whole-house-power management.

The RS13-C150 includes a 100-amp switch and includes two, 50-foot wiring harnesses. The RS13-250 includes the 200-amp switch and the two 50-foot wiring harnesses.

The RS13-C1100 with the 100-amp switch along with the RS 13-C2100 with 200-amp switch each have two, 100-foot wiring harnesses.

For more info go to: